SAPFIR 2020 R3 Release Notes

SAPFIR-Structures

• Corrected options to create and edit the opening in the wall if 'Invert' option is defined for 'Orientation'.

• Enhanced option to correct location of the opening by line into walls if the generation of opening was cancelled with Esc button.

• Enhanced option to generate PRB in cases when parameter 'Search for intersections' (accuracy) several times greater than parameter 'Unions' (accuracy).

• Enhanced option to generate PRB for walls.

• New option to automatically update model after 'end cleanup' is cancelled.

• Corrected error in generation of punching shear contours below the floor slab level.

• For the SP RK EN 1992-1-1:2004/2011, default parameters for generation of punching shear contours are modified, k=2.

• Enhanced option to determine the plate thickness if the 'Plate' option if defined as analytical interpretation of the beam.

• New option to automatically update analytical model of inclined slab when the slab is modified through the control points.

• Enhanced option to define the earthquake by SP 14.13330.2014/2018 (56).

Large panel buildings

• New option to save initial length of the axial line of the wall when joints are generated.

• Enhanced tool to automatically generate joints ('Apply…' command, 'Precast concrete' dialog box).

• Corrected behaviour of the horizontal joint for the case when in the opening in wall parameter 'Vertical lines of triangulation' is defined.

• Enhanced option to generate intersections in the meshed model for the special elements of springs.

Generator

• Enhanced option to generate block of nodes.

• Enhanced arrangement of nodes on the canvas for the 'Unite/Split block' commands.

• New option to snap the lower level of walls and columns to the intermediate level of the storey.