Configuration & Prices: MONOMAKH-SAPR2016
Structural engineering software LIRALAND Group
Model of the structure is generated from structural elements (STE). Loads are collected automatically, sections of structural elements can be determined and checked. It is possible to obtain report in rtf-format and generate bill of materials. Data may be exported to other modules of MONOMAKH software and to LIRA software.
Analysis and design of monolithic reinforced concrete continuous beam. Diagrams of forces, displacements and materials. Analysis results in the form of working drawings. DXF file of the drawing.
Analysis and design of monolithic reinforced concrete column of different cross-section (rectangular, I-section, T-section, cross and angle sections, ring section, etc.). Analysis results in the form of working drawings. DXF file of the drawing.
Analysis and design of monolithic reinforced concrete footing of columns for specified geotechnical properties. Calculations of bedding. Analysis results in the form of working drawings. DXF file of the drawing.
This module is distributed as bonus in PRO bundle configuration.
Analysis and design of monolithic reinforced concrete L-shaped retaining wall for specified geotechnical properties. Check of the massive retaining wall. Analysis results in the form of working drawings. DXF file of the drawing.
This module is distributed as bonus in PRO bundle configuration.
This module is distributed as bonus in PRO bundle configuration.
Analysis and design of monolithic RC floor slab of arbitrary shape. Static analysis by FEM. Contour plots of displacements, forces and design reinforcement – longitudinal, transverse, and punching shear. Mesh reinforcement and rebars. Design model may be exported to LIRA-FEM program.
Analysis and design of monolithic RC foundation slab (of arbitrary shape) on natural bed. Soil model may be imported. Static analysis by FEM. Contour plots of displacements, forces, reactions and design reinforcement – longitudinal and transverse. Mesh reinforcement and rebars. Design model may be exported to LIRA-FEM program.
Analysis and design of monolithic RC foundation slab (of arbitrary shape) on piles. Soil model may be imported. Static analysis by FEM. Contour plots of displacements, forces in slab and piles, design reinforcement – longitudinal and transverse. Mesh reinforcement and rebars. Design model may be exported to LIRA-FEM program.
Analysis and design of plane monolithic reinforced concrete wall of arbitrary shape with specified holes. Combined action of the elements included in the diaphragm - walls, columns, beams and trusses - is taken into account. Diagrams of forces, contour plots of stress, displacement and design reinforcement. Analysis results in the form of working drawings. DXF file of the drawing.
Distributed with BUILDING module.
Behaviour of brickwork together with RC elements of structure (flanges, columns, structures of elevator shaft, etc.) is considered. Parts of walls from brickwork are analysed on normal / shear forces and bending moments obtained in FEA of the structure in BUILDING module for a certain level of brickwork. Shape of such parts is defined before analysis procedure. Strength analysis of brickwork; mesh reinforcement and rebars.
Behaviour of brickwork together with RC elements of structure (flanges, columns, structures of elevator shaft, etc.) is considered. Parts of walls from brickwork are analysed on normal / shear forces and bending moments obtained in FEA of the structure in BUILDING module for a certain level of brickwork. Shape of such parts is defined before analysis procedure. Strength analysis of brickwork; mesh reinforcement and rebars.
3D soil model is generated by the specified geologic properties in boreholes. Moduli of subgrade reaction are calculated with account of load from the structure under consideration and from the neighbouring structures as well. Soil model may be exported to BUILDING and SLAB modules.
- module for drawings of RC structures and RC items;
- export of DXF-files of drawings;
- different systems of measurement units and their combinations;
- interface (converter) to LIRA-SAPR, ArchiCAD, DEF-PC;
- Russian and English language for interface and/or documents;
- Customer Support during the first twelve months after purchase

Price list for purchase of several licences
Licence | % of price | Discount | Standard | Standard plus | PRO |
2nd and 3rd licence | 70% | 30% | ˆ1400 |
ˆ1680 |
ˆ2100 |
4th and 5th licence | 60% | 40% | ˆ1200 |
ˆ1440 |
ˆ1800 |
6th licence - 10th licence | 50% | 50% | ˆ1000 |
ˆ1200 |
ˆ1500 |
11th licence and the following | 40% | 60% | ˆ800 |
ˆ960 |
ˆ1200 |
![]() |
![]() |
![]() |

Price MONOMAKH-SAPR 2016 upgrade from
Upgrade from | % of price | year | Standard | Standard plus | PRO |
MONOMAKH-SAPR 2013 | 25% | 2013 | 500 ˆ |
600 ˆ |
750 ˆ |
MONOMAKH-SAPR 2011 | 35% | 2011 | 700 ˆ |
840 ˆ |
1050 ˆ |
MONOMAKH 4.5 | 35% | 2009 | 700 ˆ |
8400 ˆ |
1050 ˆ |
MONOMAKH 4.2 | 35% | 2009 | 700 ˆ |
840 ˆ |
1050 ˆ |
MONOMAKH 4.0 PRO | 35% | 2006 | 1050 ˆ |
||
![]() |
![]() |
![]() |

Do you have any questions?
Ask a Question / Purchase