MONOMAKH-SAPR

MONOMAKH-SAPR 2016 is software for analysis & design of
reinforced concrete multi-storey buildings with arbitrary configuration in plan

MONOMAKH-SAPR software is intended for analysis and design of monolithic reinforced concrete structures and structures with brick walls. It is possible to perform analysis of the whole structure or its separate parts and generate working drawings and reinforcement patterns for structural elements.

MONOMAKH-SAPR program is highly profitable for analysis of structures of residential and public multi-storey buildings. The software is helpful when you take design decisions, make individual projects with arbitrary room layout, have much of design work and make an appraisal (expert judgement) of completed projects.

Certificate of compliance to building codes of RF (from April 10, 2013 to April 9, 2015).
Copyright certificate No. 38879 from June 25, 2011.

To make the procedure of model generation in BUILDING module as less time-consuming, you could also apply plans generated in AutoCAD and models generated in ArchiCAD. The object may be generated in less time in BUILDING, SLAB, ELEVATION (WALL) modules of the program and then it is possible to export data to LIRA-SAPR program and present drawigns of reinforced concrete structures.

  • Operating systems: Windows XP/Vista/7/8.
  • Analysis of the whole structure and its structural elements.
  • Support for building codes of Ukraine, Belarus, Russian Federation and Europe.
  • Working drawings and reinforcement patterns may be obtained.
  • Interrelation with AutoCAD, ArchiCAD, DEF-PC.
  • Design models may be exported to LIRA-SAPR program.
  • Technical Support during the first twelve months after purchase (term of Technical Support may be extended).
  • Russian, English and Ukrainian languages for user interface and/or documents.

  • The software package contains the basic module BUILDING and the following design modules: BEAM, COLUMN, FOOTING, REWALL, SLAB, ELEVATION (WALL), BRICK. These modules have interrelated data. With design modules you could work either in stand-alone mode or work with data that was automatically generated in BUILDING module.  

    BUILDING

    BUILDING module enables you:
    – to generate model of the structure from structural elements on the plan of arbitrary shape;
    – to collect loads automatically, to select and check sections of structural elements;
    – to generate bill of materials with prices;
    – to generate 3D model of the structure and carry out finite element analysis (FEA) with evaluation of analysis results;
    – to export data to other design modules of the program;
    – to export loads on footings to DEF-PC program;
    – to export design model to LIRA-SAPR program.



    BEAM

    BEAM module enables you:
    – to import design model from BUILDING module or generate it in stand-alone mode. Beam may have different height of the section in various spans. Section of beam is rectangular. Flange is taken into account;
    – to analyse beam according to ultimate limit states and serviceability limit states;
    – to obtain envelope lines for displacements, forces;
    – to determine necessary reinforcement;
    – to obtain material diagram;
    – to use welded or tied reinforcing cages for the beam;
    – to arrange reinforcement and draw the beam.



    COLUMN

    COLUMN module enables you:
    – to import design model from BUILDING module or generate it in stand-alone mode. Reinforced concrete monolithic column may be of different cross-section (rectangular, I-section, T-section, cross and angle sections, ring section, etc.);
    – to analyse column according to ultimate limit states and serviceability limit states;
    – to determine necessary reinforcement;
    – to arrange reinforcement and draw the column.



    FOOTING

    FOOTING module enables you:
    – to analyse and design reinforced concrete monolithic footing for columns for specific geological properties of the site;
    – to import design model from BUILDING module or generate it in stand-alone mode;
    – to perform calculations of soil and footing;
    – to determine necessary reinforcement;
    – to arrange reinforcement and draw the footing.



    REWALL

    REWALL module enables you:
    – to analyse and design monolithic reinforced concrete angle-shaped retaining wall for the specified geological properties of the site;
    – to check the massive retaining wall;
    – to generate model in stand-alone mode;
    – to analyse retaining wall according to ultimate limit states and serviceability limit states;
    – to determine necessary reinforcement;
    – to arrange reinforcement and draw the retaining wall.



    SLAB

    SLAB module enables you:
    – to analyse and design monolithic reinforced concrete floor slab, and foundation slab on natural bed or on pile footing;
    – to import design model from BUILDING module or generate it in stand-alone mode. Slab contour may be of arbitrary shape. Variable thickness of the slab and specified holes are taken into account;
    – to analyse the slab together with beams;
    – to take into account the flexibility of supports;
    – to define regions with different soil properties (for foundation slab);
    – to obtain contour plots of displacements and forces, diagrams for the specified line segments;
    – to obtain contour plots of stress under the base of foundation slab or mosaic plots of forces in piles;
    – to export design model to LIRA-SAPR program;
    – to analyse slab according to ultimate limit states and serviceability limit states;
    – to determine necessary reinforcement and obtain contour plots of design reinforcement;
    – to use reinforcing cages and rebars for the slab;
    – to arrange reinforcement and draw the slab.



    ELEVATION (WALL)

    ELEVATION (Wall) module enables you:
    – to analyse and design monolithic reinforced concrete wall of arbitrary contour together with adjacent frame structures;
    – to import design model from BUILDING module or generate it in stand-alone mode. Variable thickness of the wall and specified holes are taken into account;
    – to obtain deformed shape of the model;
    – to obtain contour plots of displacements and stresses for elements of the wall, diagrams of design forces for bar elements;
    – to export data to BEAM and COLUMN modules;
    – to export design model to LIRA-SAPR program;
    – to analyse wall according to ultimate limit states and serviceability limit states;
    – to determine necessary reinforcement;
    – to obtain contour plots of design reinforcement;
    – to use reinforcing cages and reinforcing bars for the wall;
    – to arrange reinforcement and draw the wall.



    BRICK

    BRICK module enables you:
    – to analyse the whole model of the structure with account of combined behaviour of brick walls and reinforced concrete items (RC);
    – to consider that floor slabs are eccentrically supported by brick walls;
    – to analyse separate parts for the specified levels of brick walls;
    – if reinforcement is required, to determine at which intervals (number of brickwork rows) the reinforcement cages should be located and to make appropriate darwings.



    SOIL

    SOIL module enables you:
    – to generate 3D soil model according to specified geological properties of the site;
    – to define database of properties for soil layers;
    – to specify arrangement and upper levels of boreholes, define soil layers in a borehole;
    – to specify arbitrary surface loads from existing structures and structures under consideration as well;
    – to compute fields of soil settlements and rigidity of elastic foundation (subgrade moduli) according to different criteria;
    – to export calculated subgrade moduli (variable across the foundation slab) to BUILDING and SLAB modules where they are used for analysis of footings and foundation slabs.


    Configuration & Prices

    Analysis of reinforced concrete (RC) elements.
    Analysis results may be presented as working drawings.
    DXF-files of drawings and text files of reports are generated.