Training Course: LIRA-SAPR for intermediate users

Structural engineering software LIRALAND Group

Prerequisites: working knowledge of Course 1 (LIRA-SAPR for elementary users).
Duration: 5 days.

Curriculum

  1. General principles and methods of composing 3D design models:
      - to carry out analysis of structures by the following pattern: overground structures – foundation structures – soil (pile) foundations;
      - to define hinges in bars and plate elements;
      - to unify local axes in plate elements;
      - to present design model in 3D view mode;
      - to use perfectly rigid bodies (PRB).
  2. Local coordinate system of nodes demonstrated with analysis of cylindrical tank.
  3. How to deal with load cases, design combinations of forces (DCF), design combinations of loads (DCL).
  4. Analysis of reinforcement and evaluation of analysis results in the mode of reinforced concrete (RC) and steel structures:
      - to carry out analysis of reinforcement using design options (different building codes, material properties) and evaluate the output data;
      - to design beam and obtain drawing;
      - to design column and obtain column;
      - to define and apply structural elements (STE) and unify bars;
      - to set the colour palette for analysis results of reinforcement.
  5. Local mode of reinforcement (analysis of reinforcement and check for the specified reinforcement according to ultimate limit states in bars and plate elements).
  6. Analysis of steel structures and evaluation of analysis results in the mode of reinforced concrete (RC) and steel structures:
      - to deal with design options (different building codes, material properties);
      - to obtain results for selection and check of sections of steel bars;
      - to define and apply structural elements (STE) and unify bars;
      - to analyse simple and compound parametric steel joints.
  7. Local mode for analysis of steel structures.
  8. How to use certain systems and additional special solvers:
      - DOCUMENTER – to generate input and output data files in table and graphical from;
      - LITERA – to calculate principal and equivalent stresses in finite elements of the model;
      - STABILITY – to carry out stability analysis;
      - FRAGMENT – to calculate loads on selected nodes from the rest part of the model by load combinations;
      - SRS-SAPR – to edit steel table of rolled and cold-formed shapes;
      - SB-SAPR – to generate sections of arbitrary shape and calculate their axial, flexural, torsion and shear properties;
      - STB-SAPR – to generate geometry of nonstandard thin-walled sections of elements and calculate their stiffness properties;
      - SOIL – to automatically generate soil model by specified geological properties and calculate calculate moduli of subgrade reaction of soil.
  9. Dynamic analysis of 3D systems (wind pulsation and earthquake load based on response spectrum analysis by accelerograms).

+ 2 hours of practical skills per day.


For more information and registration, please contact us at international@liraland.com.ua.

Back