Update for LIRA-SAPR 2018 R2

January 9, 2019

Update 1 for LIRA-SAPR 2018 R2 is presented. Analyses of RC and steel structures, DCF calculation, pilot reinforcement (PR), SOIL system, METEOR system, Report Book are updated. New checks are provided before analysis procedure, option to save from SAPFIR-3D 2018 to versions SAPFIR-3D 2016 and earlier, enhanced list of data transferred from study versions SAPFIR to VISOR-SAPR, modified SAPFIR-GENERATOR module, SAPFIR-RC, etc.



  • Corrected: mosaic plot for destructed nolinear bars; mosaic plot is generated from analysis results of physically nonlinear problems
  • In geometric transformation of finite elements (intersection, division, union of FE): clarified location of linear distributed loads applied to the plate rib in transformed elements
  • Arranged: simultaneous presentation of elevations and masonry levels on design model
  • Resolved: repetition of certain colours in adjusted colour palettes for reinforcement when you edit ranges
  • Clarified: information data in the working window of the program when you display total selected reinforcement for bars (as diagrams)  
  • Added: changes in measurement units when mosaic plots of accelerations are displayed
  • Corrected: update of list of stiffnesses from FEA in the ‘Stiffness and materials’ dialog box for Undo/Redo options
  • Correñted: possible program crash in case ‘Select vertical bars’ and ‘Select horizontal bars’ modes were defined - when you select elements according to the list in PolyFilter
  • Corrected: inaccuracies in presentation of problems with assemblage; such inaccuracies occurred when you switched from the mode of analysis results (by assemblage stages) to the mode of input data when you work with the model fragment   
  • Corrected: scale in graphic presentation of reactions on fragment
  • Corrected: visualization (on the model) of offsets in bars when mosaic plots of analysis results and properties are displayed

FEM Solver

  • Restored: option to use special ‘Dynamics-plus’ solver for analysis of nonlinear problems
  • Added: option to check data about criteria of rupture defined in parameters of nonlinear stress-strain diagrams for main materials in plate elements
  • Eliminated: possible failure in analysis of reactions on fragment; such failure occurred when you deleted on the model all nodes included into the list of the fragment and start analysis of the fragment

RC structures

  • Clarified: algorithm to select and check reinforcement for circular columns according to DBN B.2.6-98:2009, no delay in analysis of reinforcement
  • Clarified: design parameters in punching shear analysis of RC slabs
  • Added: check of multi-contour option in analysis of reinforcement for RC bars of rectangular and circular sections and bars with composite (steel & concrete) sections
  • In analysis of reinforcement in bars with circular pipe section, clarified: ‘Asymmetry’ feature in parameters of RC materials
  • Added: additional checks when you save (to)/download (from) file of RC materials, and when you transfer data about RC materials to analysis of reinforcement

Pilot reinforcement (PR)

  • Clarified: location of mesh reinforcement in cross-section of plates for physically nonlinear analysis in case you use types of pilot reinforcement (PR) and reinforcement is described as formula (rebar diameter – mesh spacing)
  • Clarified: parameters of cracks in plate elements for cases when reinforcement is defined with types of pilot reinforcement (PR) - in physically nonlinear problems for RC elements and when you use NL engineering 2
  • Clarified: total reinforcement for PR types that have coincident rebars - in physically nonlinear problems for RC elements, when reinforcement is defined with types of pilot reinforcement (PR)
  • When you edit parameters of PR types, the program saves data about previously defined nonlinear stress-strain diagram for reinforcement
  • When you edit parameters of PR types, if data is defined in tabular format (in the left part of the dialog box), it will be simultaneously displayed in the right part of the dialog box and vice versa
  • When you modify dimensions of the dialog box for PR types, the zone for ‘Exact PR type’ will be scaled automatically

Steel structures

  • Corrected: check of hollow sections in steel columns
  • Added: analysis of steel structures in METEOR system for generalized problem, generated with DCL (characteristic)


  • Clarified: algorithm for calculation of DCF for problems with assemblage stages and problems with time history analysis


  • Clarified: calculation of pile stiffness when pile is located in the pile group and with account of mutual interaction
  • Clarified: analysis of bearing capacity of piles in earthquake of 9 units of magnitude for clay soils with yielding 0...0.75, and account of hd according to sect.12.4 SP 24.13330.2011 for low beam grillage
  • Extended zones for values of soil parameters inn order to present them correctly on the model

Cross-section Design Toolkit             

  • The ‘Cross-section Design Toolkit’ module starts correctly from the main window of VISOR-SAPR module in some cases with nonstandard settings of working directories


  • When design model is restored from the screenshots previously saved in the Report Book, deformed shapes are presented with account of the saved scale of displacements
  • No limitations on allowed size of design models in calculation of principal and equivalent stresses and in generation of certain types of text tables
  • Enhanced presentation of colour palette elements when you print screen shots

Back to the list





is now available for download

Free Structural Design Software

Complete the form below, and we'll send you an e-mail with all the latest LiraLand news.

Follow us on social networks

To receive notifications about new messages
in Facebook, click "Like"
Thanks, do not show this message again.