ESPRI program in English presents: interface and reports for the whole software package (all 77 modules), help systems are now available for 72 modules.
Punching shearNew module ‘Punching shear analysis (Belarus)’ is introduced. The module enables you to carry out punching shear analysis of rectangular slabs according to SNB 5.03.01-02 (Belarus). The presence of column capitals is considered. 8 design situations are considered in 5 possible variants.
Masonry and masonry reinforcingThe building code SP 15.13330.2012 ‘Masonry and masonry reinforcing’ is supported in the following modules:
- Brick pier,
- Brickwork in local compression,
- Brick pier in tension.
Modifications to the following modules
- Sections of RC elements;
- Effective lengths of steel structure elements;
- Settlement of equivalent footing;
- Beaing capacity of piles by field test results;
- Combined piled-raft foundation;
- Wind loads.
ESPRI program in English presents: interface and reports for the whole software package (all 76 modules), help systems for 66 modules. ‘Masonry and masonry reinforcing’ chapter is now available in English.
Foundations and beddingsNew module ‘Combined piled-raft foundation’ is introduced. The module enables you to calculate settlement for combined piled-raft (CPR) foundation and parts of load taken by the slab and piles.
Punching shearNew module ‘Punching shear analysis by Eurocode’ is introduced. Punching shear analysis of rectangular slabs according to EN 1992-1-1 (Eurocode 2), DBN V.2.6-98:2009 and DSTU B V.2.6-156:2010 (Ukraine), CH PK EN 1992-1-1:2004/2011 (Kazakhstan). Capitals of columns are taken into account. 8 design situations (schematic presentations) in 4 possible variants are considered.
Sheet pilingIn this module you could now define number of iterations when calculating stress strain state of soil and anchors.
SoilModule is modified with account of water saturation of soil above the load application level.
Engineering Assistance Package (ESPRI) is now available in English
We are pleased to offer you ESPRI program in English: interface and reports for 69 modules out of 74, help systems for 44 modules. To change the language for interface, use the system menu of the program located in the upper-right corner of a window.
Reinforced concrete structures
The chapter contains new module Composite steel and concrete columns (strength analysis for sections of composite steel and concrete columns of rectangular section). Calculation is made according to deformation model of reinforced concrete with account to bilinear, trilinear and nonlinear diagrams. The following building codes are supported: SP 63.13330.2012, SP 16.13330.2011, DBN V.2.6-160:2010, DBN V.2.6-98:2009, DBN V.2.6-135(163):2010.
Foundations and beddings
Module Bearing capacity of piles by field test results presents new options for calculation:
- drilled piles at probe point;
- driven piles at test point of model pile;
- driven piles at test point of probe pile;
- dynamic pile tests.
Punching shear for rectangular contour
Account of moments is improved. Help system is updated.