http://www.liraland.com New posts in Set soil characteristics in LIRA-SOIL of forum at liraland.com [www.liraland.com] en http://backend.userland.com/rss2 Tue, 21 Apr 2026 12:01:45 +0300 Set soil characteristics in LIRA-SOIL in forum General Discussion.
The attachment of separate scheme simplify the process of load setting fr om nearby objects. As well, it allows you to transfer more accurate picture of loads redistribution than to do it by setting the average value on the whole stamp. You're right, many do not think about it and consider "all in one". Sometimes it is entire neighborhoods. But still it should be a reasonable lim it.
Dec 10, 2014 11:28:49, alekstish.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12250/ http://www.liraland.com/forum/messages/forum3/topic1675/message12250/ Tue, 10 Dec 2013 11:28:49 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.

====quote====
alekstish wrote:
for example, to transfer the first section as a group of loads "1", the second with the number "2" and so on

=============
Does it mean that it is necessary to solve successively several tasks, to get final picture of subgrade reaction coefficients? It is interesting, for which tasks it is appropriate in comparison to the method “all in one”?
Dec 9, 2014 13:25:33, ander.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12249/ http://www.liraland.com/forum/messages/forum3/topic1675/message12249/ Mon, 09 Dec 2013 13:25:33 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.
Thank you for the answer. You helped me a lot.
Nov 28, 2014 15:36:49, Ultol.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12228/ http://www.liraland.com/forum/messages/forum3/topic1675/message12228/ Sat, 28 Dec 2013 15:36:49 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.
When attaching the soil model to each section (design scheme) it is necessary to transfer loads as “new” group, i.e. to set a serial number different from that which has already been written in the soil model. In other words, it is necessary, for example, to transfer the first section as a group of loads "1", the second with the number "2" and so on. If the number is the same, the load deletes previously written one in the file. You can transfer one of the loads in the soil model, and represent the load from constructed sections in the form of load stamps with their average value setting them manually.
Nov 28, 2014 14:33:50, alekstish.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12227/ http://www.liraland.com/forum/messages/forum3/topic1675/message12227/ Sat, 28 Dec 2013 14:33:50 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.
Hello! Description of the situation: the building consist of several sections on a monolithic slab. The models are constructed for each section and the model of the soil is constructed as well. Each scheme (for calculation of modulus of subgrade reaction) is attached to one model of the soil. The task is to check building sediment when loads acting on the soil fr om different sections working together and separate. But during recalculation the loadings on the soil from other tasks were not taken into account. What is the way to consider them? Or, wh ere I can read about it? Is it really possible? Or, it is required to build own model of the soil taking into account loadings from nearby sections for each case?
Nov 27, 2014 15:21:12, Ultol.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12224/ http://www.liraland.com/forum/messages/forum3/topic1675/message12224/ Fri, 27 Dec 2013 15:21:12 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.
Thanks for the help. You really helped me.
Sep 19, 2014 21:25:40, Toffe.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12042/ http://www.liraland.com/forum/messages/forum3/topic1675/message12042/ Thu, 19 Dec 2013 21:25:40 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.
In the given situation, you should act from reverse: open module SOIL and enable display of imported loads mark. Which number do you see? If the bottom mark is right, then no action is required. If not, then change Z mark at the difference between what should be and what do you have. Your task is to have mark for application of imported loads displayed correctly on the plan.

Other words, if you say that 20.69 is top of the building, then calculate datum for reference mark 20.69 and you should get what you need. Provided, if the level of foundation was set hair in exactly. In any case, you should be sure in correctness on the plan and cross-section.
Sep 19, 2014 04:23:38, ander.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12041/ http://www.liraland.com/forum/messages/forum3/topic1675/message12041/ Thu, 19 Dec 2013 04:23:38 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.
Tell me please more in details. The number from the left generated automatically (just do not understand how it turns out. There must be a kind of reference mark of foundation base. It just is not the same.), from the right side the datum is set in the ground corresponding to back wells.  I cannot understand what went wrong.

[FILE ID=10154]

Sep 18, 2014 19:19:26, Toffe.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12040/ http://www.liraland.com/forum/messages/forum3/topic1675/message12040/ Wed, 18 Dec 2013 19:19:26 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.

====quote====
Toffe wrote:
How to be in this situation?

=============
You need to fit in information, i.e. set such a number at which level of foundation bottom corresponds to necessary reference mark in the ground.
This usually happens when the file of soil model is used from some old problem.
Sep 18, 2014 06:51:02, ander.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12038/ http://www.liraland.com/forum/messages/forum3/topic1675/message12038/ Wed, 18 Dec 2013 06:51:02 +0200 General Discussion Set soil characteristics in LIRA-SOIL in forum General Discussion.
Advise me please, what value of datum (z) should be on the left side of the tab "Imported load" in Lira-SOIL. I mean, benchmark of design scheme in VISOR-SAPR. If the foundation in VISOR is at the level -3.5, do this number should correspond it? Just set datum on the right, i.e. benchmark in soil model 115.8, and the number on the right automatically established at 35.8 m, i.e. this is top of the building. How to be in this situation?
Sep 17, 2014 13:48:09, Toffe.]]> http://www.liraland.com/forum/messages/forum3/topic1675/message12037/ http://www.liraland.com/forum/messages/forum3/topic1675/message12037/ Tue, 17 Dec 2013 13:48:09 +0200 General Discussion